Berner 052872 Instrucciones De Manejo página 7

Maintenance
Disassemble and inspect air motor and governor assembly every three months if the
tool is used every day. We prefer that you use our distributor to replace damaged or
worn parts.
Please use the spare parts list as a guide manual when dismantling or assembling the
tool.
High wear parts are indicted as service kit in the parts list. To reduce risk of injury,
everyone using, installing, repairing, maintaining, changing accessories on, or working
near this tool must read and understand these instructions before performing any such
task.
Pneumatic tool and safety instructions
The goal of BERNER is to offer tools that help you work safely and effi ciently. BERNER GmbH
The goal of
The most important safety device for this or any tool is YOURSELF.
Your care and good judgement are the best protection against injury. All possible hazards
cannot be covered here, but we have tried to highlight some of the important ones. This tool
and its accessories must not be modified.
This tool may only be used by qualified people.
Wheel guard usage:
Use safety barriers to protect others from wheel fragments and grinding sparks.
Always use the recommended wheel guard to prevent injury from broken grinding
wheel parts.
If a guard has withstood a wheel breakage do not continue to use it.
Place the guard between the grinding wheel and the operator.
For additional safety information consult:
The instruction manual and any leaflet packed with this tool.
Your employer, union and/or trade association.
Council of the European communities and/or local codes.
"Safety requirements for hand-held non-electric Power Tools ". Available from:
European committee for standardisation, Rue de Strassart 36, 1050 BRUSSELS,
Belgium.
Air supply and connection hazards:
Air under pressure can cause several injury.
Always shut off air supply, drain hose of air pressure and disconnect tool from air supply,
when not in use, before changing accessories or when making repairs.
Put never direct air at yourself or anyone else.
Whipping hoses can cause serious injury. Always check for damaged or loose hoses
and fittings.
Do not exceed maximum air pressure of 6.2 bar or as stated on the name plate.
Do not use quick disconnect couplings at tool. See instructions for correct set-up.
is to offer tools that help you work safely and efficiently.