Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Hold the bail switch against the handle with one hand. Pull the self-propel lever to the
handle with the other hand.
4. With one hand, hold both the bail switch and the self-propel lever against the handle and
use the other hand to adjust the self-propel speed adjustment knob to choose the desired
speed.
NOTICE: When you turn off the self-propel, for example, at the end of a row, it may become
temporarily locked if you pull backwards on the mower. Simply push ahead slightly and then
move the mower as required.
NOTICE: During cutting, at times it may be easier to mow around an object, with the self-
propel turned off.
WARNING
purpose only .

Mowing Tips

NOTICE: A sharp blade will greatly enhance the performance of the mower, especially when
cutting tall grass. Make sure to check the sharpness of the blade before mowing.
Verify that the lawn is free of stones, sticks, wires, and other objects which could damage
the lawn mower or motor. Such objects could be accidentally thrown by the mower in any
direction and could cause serious personal injury to the operator and to others.
WARNING
before restarting and operating the mower. Excessive vibration of the mower during operation
is an indication of damage. The unit should be promptly inspected and repaired.
For best results, do not mow in circles. Travel back and forth across the lawn.
When cutting thick grass, reduce your walking speed in order to allow for a more effective
cut and a proper discharge of the clippings.
To maintain a healthy lawn, cut off only one-third or less of the total length of the grass.
The average lawn should be approximately 1-1/2 to 2 inches long during cool months, and
between 2 to 3-1/4 inches long during hot months.
WARNING
To reduce the risk of injury, never attempt to override the operation of
the switch or self-propel system . Use the self-propel for its intended
If you strike a foreign object, stop the motor and remove the battery.
Thoroughly inspect the mower for any damage, and repair the damage
Always remove the battery pack from the mower after finishing work.
21

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Sm4910-00

Tabla de contenido