Important Safety Notes - Martin Yale Industries PAPERMONSTER L220SC Instrucciones De Uso

GB

IMPORTANT SAFETY NOTES

<< The machine may not be operated by more
than one person at any given time!
The machine was designed for safe operation
by "one person only".
<< During the shredding process no other
work may be performed on the machine
(for example cleaning, etc.)!
<< The machine is not a toy, and is not suitable
for use by children!
The overall technical safety concept of
this machine (dimensions, feed openings,
emergency shutdown devices etc.) does not
provide for any guarantee regarding hazard-
free operation by children.
<< Repairs may only be performed by trained
personnel!
OPERATING FUNCTIONS:
1 = Pushbutton switch „ready" (fig. 1)
Depress this switch to start the machine or
to stop the machine.
2 = Pushbutton
„Cutting system forward" (fig. 1)
Pressing this button starts the cutting system.
Material can now be fed to the shredder.
3 = Pushbutton
„Cutting system reverse" (fig. 1)
Pressing this button starts the cutting system
in reverse.
Note: The cutting mechanism only runs
backwards as long as the button is held
(touch function).
4 = Light barrier (forward run) (fig. 2)
The shredding operation is started as soon
as a sheet of paper passes through the feed
slot.
5 = Pilot lamp „ready" (fig. 1)
Lights when the pushbutton switch (1) is
operated.
5
7
6
fig. 1
<< Danger of injury! Keep all
<< Danger of injury! Never insert fingers into
opening!
<< Danger of injury! Do not spray and flam-
mable liquids or gases into the inlet open-
ing!
<< In case of danger switch the machine off
with the mains switch, or with the emer-
gency switch, or unplug the machine!
<< Always unplug the machine from the
mains power supply before opening the
machine!
OPERATION
6 = Pilot lamp "material jam" (fig. 1)
Lights when too much material is fed to the
cutters. The cutting system blocks and stops.
The motor is switched off.
7 = Pilot lamp "motor overload" (fig. 1)
Lights up if the motor is overloaded. The
machine cannot be started again until the
motor has cooled down.
8 = Paper feed slot (fig. 2)
9 = Data media feed slot (fig. 2)
10 = Receptacle (fig. 3)
11 = Receptacle full window (fig. 3)
L220SC
4
1
3
L220CC
2
4
loose articles of clothing, ties,
jewelery,longhairorotherloose
objects away from opening!
9
8
9
8
fig. 2
4
INITIATION
SCOPE OF APPLICATION:
The papermonster L220SC/CC data
shredder is designed for shredding general printed
material and data media such as CDs, DVDs and
credit cards.
This machine should only be used
for shredding paper and credit cards
and for shredding CDs and DVDs
(L220CC)!
Any attempt to shred other types of data
medium may result in damage to the
machine (e.g. destruction of the cutting
mechanism etc.).
INSTALLATION:
- Unpack and set machine upright.
- Plug in the machine (for instructions for the
necessary precautions see „TECHNICAL
DATA").
To disconnect the machine from the
power supply system, please unplug
the power plug.
The socket outlet shall be installed
near the equipment and shall be easily
accessible!
Only operate the machine in enclosed
rooms at temperatures between 10°C
and 25°C!
OPERATION
The shredder may not be used as a
step ladder or as a seat. Danger of
falling due to breakage!
OPERATING THE MACHINE:
Turn machine on with pushbutton switch (1) (fig.
1). Pilot lamp lights up (5) (fig. 1).
MATERIAL FEED:
Feeding paper
- Feed the paper into the cutting system through
the paper feed slot (8) (fig. 2).
Feeding data media
- Feed the data media (CDs, DVDs (L220CC)
or credit cards) into the cutting system one by
one through the separate feed slot (9) (fig. 2).
The machine automatically switches to forwards
running, draws the material in and automatically
switches off after shredding.
Note: For shredding transparent films, the
machine must be manually switched to forwards
running.
When shredding papers, do not shred
CD/DVD at the same time, and vice
versa!
Never feed the shredder with a
quantity of material exceeding the
maximum indicated.
TECHNICAL DATA section!
Should the machine
overloaded, follow the instructions under
"MATERIAL JAM IN MACHINE" under
"MALFUNCTIONS".
L220SC
L220CC
Refer to the
become