Technical Specifications; Technical Data - Accessmatic reflex RT2415U Manual De Usuario

Fotocelda reflectiva
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

access
The RT2415U infrared beam re ective photocell has been designed to provide security for automatic door systems.

TECHNICAL SPECIFICATIONS

- Operating voltage 12-36 V DC or 10 ~ 24V AC.
- Polarization lter.
- Range up to 15 m.
- Protection against dirt.
- Immune to external light sources.
- 2 independent cable entries.
- Protection against reverse polarity in the power supply.
- Simple adjustment.
- LED indicator for alignment and dirt.
- 12V DC power available, but may decrease e ective operating range.
FEATURES
Polarization lter: This function ensures detection even of bright objects.
Protection: Not a ected by rain, fog or snow. Protection against dirt and immunity to sunlight and external light sources.
The housing allows the device to be installed outside.
Entry: With 2 optional cable entries on the front and bottom of the housing.
Relay output: Characterized by a free voltage contact.
Alignment by screws: The adjustment of the 3 screws of the PCB inside the housing, ensure that the beam is perfectly aligned with the
re ector once the photocell and the mirror have been xed to the wall.
Dirt indicator LED: LED ash.
Alignment Indicator LED: The LED is red when the re ector and photocell are not online. Once the alignment is correct, the LED turns
green.
Test input: Terminal available for communication with those control boards that have a test terminal (and that have it enabled). It is a
constant signal, its function is to block the door in the event that communication is interrupted by said signal, that is to say; because the
photocell is disconnected (power failure or attempt to interrupt the safety signal).

TECHNICAL DATA

Supply voltage
Current consumption
Output
Light
Reaction time
Angle
Relay output
Switch type
Connections
Degree of protection
Operating temperature
Weight
Dimensions
12-36 V DC / 10 - 24 V AC
30 mA / 24 V (max)
Min 1 mA / 5 V DC
Max 0.5 A / 48 V AC (resistive load)
Max 0.6 A / 50 V AC
689 nm pulsed, polarized
<100 ns
1.5 ° approx
Switching contact
Sensitive to light
Screws max 1.5 mm²
IP 67 EN6052
-25 + 60 ° C
60 g
85 x 43 x 39mm³ (L x W x H)
Opening your life

Publicidad

Tabla de contenido
loading

Tabla de contenido