Preparing The Units; Installing The Appliance - Gaggenau DV061100 Instrucciones De Montaje

en Preparing the units

Preparing the units

Install the tilt protection. Ensure that the screws are
1.
mounted in the upper part of the elongated holes.
Use the installation aid to secure the mounting
2.
bracket to the unit.

Installing the appliance

WARNING ‒ Risk of electric shock!
If the insulation of the power cord is damaged, this is
dangerous.
Never let the power cord come into contact with hot
▶
appliance parts or heat sources.
Never let the power cord come into contact with
▶
sharp points or edges.
Never kink, crush or modify the power cord.
▶
WARNING ‒ Risk of injury!
After removing the transport lock, the drawer may open
suddenly during transport.
Transport the appliance in such a way that the
▶
drawer does not accidentally open.
Insert the power cord into a protective contact
1.
socket.
12
2.
WARNING ‒ Risk of injury! The high weight of
the appliance may result in injury when lifted.
Do not lift the appliance on your own.
▶
Slide the appliance into the unit.
If the appliance cannot slide in, adjust the height of
3.
the tilt protection brackets. To do this, undo the
screws and push the tilt protection brackets up-
wards.
Centre the appliance.
4.
To check the tilt protection, open the drawer care-
5.
fully.
Select appropriate decorative panels.
6.