ZIBRO CLIMA DX17 Instrucciones De Uso página 27

DEHUMIDIFIER INSTRUCTIONS FOR USE
To guarantee maximum safety and optimum efficiency, we strongly recommend
that you read these instructions carefully before installing and operating the de-
humidifier.
THE DEHUMIDIFIER
The function of the machine is to reduce the level of humidity in the room where
it is installed. However, the machine that you have purchased can also heat air. The
specific properties make this machine a de-humidifier and/or a heater. It can be
used in any room or area with elevated humidity levels, or in locations where a
more comfortable temperature is desired, such as kitchens, basements, etc.
The machine is fitted with wheels and handles for convenient transportation.
Studies have revealed that environments with a relative humidity between 45%
and 60% are ideal for both humans and animals, and the preservation of objects.
A
INSTALLATION
Place the machine in the room or area that you wish to de-humidify, ventilate or
heat. Leave a gap of at least 50 cm. around the machine to ensure effective
circulation. Check the following before activating the machine:
Do you have the correct mains voltage, as stated in the "Technical
specifications"?
Is the plug suitable for the wall socket? If this is not the case, the plug may
only be replaced by a qualified individual.
Are you using an earthed socket?
B
OPERATION
Insert the plug into the socket and press the
1
indicate that the device is switched on.
2 Check whether the
properly and does not need to be emptied.
Turn the control button
3
'Normal' setting ; for automatic operation based on a normal humidity
level (between 45% and 60%).
'Max' setting; for continuous operation in specific situations, such as
drying clothes, etc.
Selection of the ventilator speed
4
Normal speed
Low speed
To switch the machine off:
5
Press the -button
-light » is off. If so, the reservoir has been placed
of the moisture meter to:
:
.
.
.
-button . Light lights up to
4
27