Hoover CV216RB CL-EVERYDAY Manual De Instrucciones página 9

CLEANER MAINTENANCE
Emptying the Dust Container
1. Press the release button of the dust container; lift the dust container from main body. [3]
2. Open the dust container and counter clock wise rotate the filter from the dust container. [4,5]
3. Counter clock wise rotate the inner filter from the filter, and pick the sponge out of the inner filter.
Upside down over a bin to instantly empty them. [7]
4. Reassemble the filter to the dust container.
5. Reassemble the dust container to the main body. [3]
Cleaning the Filter
1. Press the release button of the dust container; lift the dust container from main body. [3]
2. Open the dust container and counter clock wise rotate the filter from the dust container.
3. Counter clock wise rotate the inner filter from the filter, and pick the sponge out of the inner filter. Wash
the inner filter and the sponge in lukewarm water and leave to dry for 24 hours. Once thoroughly dry
return to the dust container. [8,9]
4. If required, wash the dust container in lukewarm water. Ensure it is fully dry before returning to the
main body of the cleaner.
5. Reassemble the filter to the dust container.
6. Reassemble the dust container to the main body.
NOTE: Do not use hot water or detergents when cleaning the filters. If incidental the filters are damaged,
fit a genuine Hoover replacement. Do not try use the product without a filter fitted.
IMPORTANT: For optimum performance, always keep your filter clean. We recommend that the filter
should be washed at least once a month.
Changing and Cleaning the Agitator
NOTE: To remove the agitator, switch the agitator cover lock to unlock position and pull away the agitator
cover from the nozzle chassis. [10,11,12]
IMPORTANT: Do turn off the cleaner before changing the agitator.
1. Using a coin turn the lock to the unlock position. [10]
2. Remove the Agitator cover. [11]
3. Remove the Agitator. [12]
4. Replace with the new Agitator or clean it. This can only fit in one direction. [12]
5. Reassemble the Agitator cover and lock it with the coin.
Battery Replacement
For reasons of safety the Lithium-Ion batteries in this cleaner are only replaceable by a Hoover Service
engineer. When the batteries fail to maintain charge, please contact the Hoover Customer Service Centre
to arrange a replacement.
End of Product Life Battery Disposal
If the cleaner is to be disposed off the batteries should be removed. Used batteries should be taken to
a recycling station and not disposed it to household waste. To remove the batteries, please contact the
Hoover Customer Service Centre or proceed according to the following instructions:
IMPORTANT: Always fully discharge the batteries before removal and ensure charger is unplugged.
1. Run the unit until the batteries are completely empty.
2. Remove 1 screw and open the unit.
3. Remove the battery package and disconnect the cables.
4. Remove the batteries from the housing.
NOTE: Should you experience any difficulties in dismantling the unit or for more detailed information
about treatment, recovery and recycling of this product, please contact your local city office, your
household waste disposal service.
* Features vary according to model
9
GB