Ibiza DJLIGHT85LED Manual De Uso página 3

MANUAL - DJLIGHT85LED
3. DMX output: 3-pin XLR connector for DMX512 signal output
4. LED display: Display of the functions and menu buttons to control the operating mode
5. MENU buttons: See below for operation
6. Mic: Built-in microphone for sound controlled operation
7. Light stand socket: Tighten the screw to secure the controller bar to the light stand
MENU BUTTONS
You can set the operating mode of the unit via the 4 function buttons on the controller bar. Press the MENU
button to display the different functions (see table below for a detailed description of the functions). Use the
UP and DOWN arrow buttons to make your selection. Once you have chosen your desired function, press the
ENTER button to confirm the change.
LCD Display
d001-512
chnd
Chnd 3ch
11ch
AT01-AT07
S_01-S_32
So01-So03
Sn01-Sn09
slav
Operation
DMX address code setting: Press "MENU" button. When the digital LED displays d001-d512, press "UP" or
"Down" to set the address code. The code ranges from 001-512.
When controlling the unit(s) with a DMX controller, each unit must be set to a specific DMX address. You can set
either all units to the same DMX address or you can set every unit to a different DMX address. If all units are set
to the same DMX address, they are all synchronized and operate the same way.
If every unit has its own DMX address, they will receive the DMX signal that is specific to their address and you
can control every unit separately. The DMX address is determined by the number of channels. The units can
work either in 3-channel or 11-channel mode. If you set the starting address to 1, the second unit must be set
to 12 (1+11 in 11-CH mode), etc.
Connection of Signal Cable
You can use the 3-pin XLR cable to connect the OUT socket of the first light and the IN socket of the following
light. Connect all the lights as below:
A DMX signal terminator is recommended on the last unit of the chain. DMX terminator is a XLR connector with
a 120Ω resistor between the pin 2 and pin 3 of the XLR connector
DMX Control
Choose DMX Channels
3
11
Auto (Built-in Program)
Speed
Sound
Sensitivity adjustable
Slave
www.ibiza-light.com
3