BiAL ELS Manual De Usuario página 17

for 45° C. The following diodes refer to the
following maximum temperatures: 50° C,
55° C, 60° C and 65° C.
After selecting the new temperature span
press on/off button to store the new
settings.
Problem solving
Problem
The device is plugged in,
no diodes are on.
Heating element is not
heating, outside diodes are
blinking alternately.
The device is heating de-
spite turning it off with the
button.
If the problem continues please contact Your local Distributor.
EN
Possible cause
Problem with the
connection.
Temperature sensor has
been damaged.
Overheating of device.
Damaged electronics.
Solution
Check the connection of
the power wire, the plug
and the socket.
Disconnect the device
completely, wait until the
radiator cools down and
re-connect it again.
Check that the radiator
has been filled with the
correct heating agent in
a proper manner, i.e. ac-
cording to the manufactur-
er's instructions.
Disconnect the device
completely, wait until the
radiator cools down and
re-connect it.
17