Priorit AS32 Serie Manual De Instrucciones página 26

Installing the Centre Partition: (AS32-XXX-MW-X)
center partition
(AS32-XXX-MW-X)

To install the centre partition at the top (AS32-XXX-MW-O), pre-drill the cover and the top side of
the middle shelf with a Ø 5 mm drill, then drill to a depth of 12 mm

To install the centre partition at the bottom (AS32-XXX-MW-U), pre-drill the shelf and the bottom
side of the middle shelf with a 5 mm Ø drill, then drill to a depth of 12 mm

Drive in screw dowel

Push the centre partition sideways against the screw dowels so that the excenters on the centre
partition engage the dowels

Rotate the excenters to fasten the centre partition
Installing the Fixed Shelves: (AS32-KB-MW)
screw dowel
After installing the centre partition at the top (AS32-XXX-MW-O) the fixed shelves (AS32-KB-MW) must be
installed.

Screw the screw dowels into the second hole from the top (third hole from the top if also installing
AS3X-TS)

Insert AS32-KB-MW so that the screw dowels engage the excenters

Rotate the excenters to fasten AS32-KB-MW
EP.V.9906-3
screw dowel
excenter
excenter
26 von 88