Changing And Saving The Coffee Quantity; Setting The Grinding Texture; Menu Settings; Setting Language - Fagor Xperta Instrucciones De Uso

GB
10.2 Changing and saving the coffee
quantity
This is only possible with coffee bean
mode, not for use with ground coffee.
Should your taste change or you find
the coffee to strong or too mild, you
can change just the coffee quantity
without changing the cup measure.
First press the „Cup Size" key (Fig. 3, d)
until the cup symbol illumi-
nates, for which you would like to
adjust the coffee quantity. The display
«1 CUP
shows e.g.
The top line in the display shows the
selected cup size. The bottom line in
the display always shows the coffee
quantity you have saved previously for
this cup measure, e.g. «STRONG»
Next press the „Coffee quantity" key
(Fig. 3, c)
fee quantity symbol is illuminated. The
display shows e.g. «MILD». The value is
now saved.
Repeat the process if you also want to
adjust the coffee quantities for the
other cup sizes.
Be sure the follow the order; first select
the cup size, then the coffee quantity.
The saved quantities remain stored
when the coffee machine is switched
off.
11 Setting the Grinding
Texture
Note! The grinder settings must be
changed only while coffee is being
ground. Making adjustments to the
stationary grinder can damage the cof-
fee machine.
Dispense a coffee with beans. During
the grinding, set the grinding texture
with the grinding texture setting lever
(Fig. 2, V) and (Fig. 19).
20
LARGE».
until the desired cof-
12

12.1 Setting language

The lever positions have the following
effects:
Fine grade for intensive taste
Medium grade for normal
taste
Coarse grade for mild coffee
Remove foreign bodies from the
grinder
Foreign bodies, such as small stones in
the grinder can damage the grinder.
The coffee machine includes a stone
detector. A foreign body in the coffee
causes a loud, even rattle. If you hear
this noise while coffee is being ground,
immediately switch off the coffee
machine and remove the foreign body,
as described in „Cleaning the Grinder".

Menu settings

You can select between several lan-
guages. The factory setting is
«ENGLISH ». You can change
this setting as follows:
Press the „Menu" key (Fig. 3, f)
The manu point «LANGUAGE»
appears.
Confirm the menu point with the „OK"
key (Fig. 3, g). The set language appears
in the display (on placing in operation
for the first time, the factory setting
«ENGLISH »).
Press the paging keys
or d) until the desired language
appears.
When the desired language is dis-
played, confirm it with the „OK" key
(Fig. 3, g). This languaage is now pro-
grammed.
.
or (Fig. 3, c