Powerbank/Rechargeable Battery - Unold 86870 Instrucciones De Uso

1. Before assembling, ensure that
you are assembling the appliance
in a place that is level and dry.
2. Remove all packaging materials
and transport safeguards. Keep
the packaging material, such as
plastic bags or Styrofoam away
from small children - danger of
suffocation!
3. Check whether all needed parts
are present.
4. If necessary, unscrew the screws
(10) slightly out of the base.
5. Precisely insert the stand tube (8)
into the base and fasten it with
the three screws (firmly tighten
the screws clockwise).
6. Fit the operating element (7) onto
the stand tube (8). In this process,
ensure that the lower end of the
operating element fits precisely
onto the holes intended for this
purpose. Fix the two components
in place with the screw.
7. You can adjust the desired height
by unscrewing the fixing screw,

POWERBANK/RECHARGEABLE BATTERY

1
5
3
26
2
6
4
sliding the tube to the desired
height, and fixing it in place with
the fixing screw.
8. Fasten the rear basket cover (6)
on the motor housing (7), by
fixing the cover in place with the
nut (5).
9. Remove the black sleeve from the
axle. Place the impeller (4) on the
axle on the motor housing (7).
Fix the impeller (4) in place with
the nut (3). Caution: Left-hand
thread!
10. Connect the front basket cover (2)
to the rear basket cover (6). Check
whether the fastening ring (1) is
in the right position (both halves
of the basket must sit precisely
in the ring) and fix them in place
with the clamp. You can secure
the clamp by screwing the small
screw into the intended hole.
11. Check whether all parts have been
correctly assembled and fixed in
place.
1 LEDs – charge status
2 Operating button
3 USD charging input
4 USD charging output
5 Connection, interface –
fan
LED/torch
6