Before Using - Beper 40.330 Manual De Instrucciones

Man Body Groomer Use Instructions
11. Use only the charging base and the adapter supplied.
12. To avoid damage, do not wrap the cable around the power supply.
13. The product can be used under the shower, rinsed under running
water, but should never be immersed in water.
14. Like all products of this category, when used for the first time or
on particularly sensitive skin, it may cause slight irritation.
Description of the product: Fig.A
1. Shaving head
2. Adaptor
3. ON/OFF button
4. Charging light
5. Lubrification oil
6. Back shaving extension
7. Charging base
8. Trimming comb 1 (3mm )
9. Trimming comb 2 (5 mm)
10. Trimming comb 3 (7mm)
11. Cleaning brush

BEFORE USING:

Before using the product, charge it completely, making sure it is switched off.
To charge fully the product will take approx. 3 hours.
To avoid damaging or compromising battery operation, do not charge it in places with temperatures below 10 °
C or higher than 30 ° C.
Check always the integrity of the shaving head and of trimming combs before use.
Put the product in the charging base, insert the adapter into the charging base, and connect it to the power outlet.
If the product is properly placed the charging light will turn and remain red until the charge is completed, when
the light becomes green.
At this point, disconnect the adapter from the power outlet and from charging base.
The product fully charged will have an operating autonomy of about 60 minutes.
OPERATION:
TRIMMING:
The product is equipped with 3 different trimming combs. Depending on the desired cutting length, choose the
appropriate trimming combs.
If you are trimming your body hair for the first time, take care to do slow and delicate movements and to use the
longer trimming comb (7mm).
Trimming with body hair and skin dry, is definitely easier and more effective.
1. Place the desired trimming combs over the shaving head, making sure that the tips will point in the same
direction you are moving the product. (if you want to shave from top to bottom to make the tips turn to yourself,
and contrary)
2. Set the power button to ON.
3. Start moving the product with slow and delicate movements, making sure that the shaving direction is opposite
to the hair growth. Also make sure that product and skin will stay in contact. Caution: Not all hairs grow in the
same direction, so you may need to change the direction of use several times while using the appliance.
4. Turn off the product by setting the button on OFF.
SHAVING:
Do not use this product to shave or cut facial or scalp hair.
While shaving sensitive areas for the first time, you may feel discomfort, irritation or redness of the skin. This is
normal because the skin needs time to adjust the shaving.
If the hairs are longer than 10mm, for optimal shaving results use the trimming comb n.1 at a length of 3mm.
10