GE GFE28GELCDS Instrucciones De Instalación página 31

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
REMOVE THE FREEZER DOOR
6
A
B
Remove 3 attachment screws, located at the
CAUTION
Lifting Hazard
Freezer door is heavy Use both hands to
secure the door before lifting.
C
to disengage it from
the slide mechanism
The door can safely
rest on the bottom.
door on any other
surfaces to avoid
scratches.
REMOVE FREEZER BASKET
7
Pull the lower basket and slide mechanism to
A
full extension using both hands.
Remove the top
B
fully extending the
drawer then lifting
up and out.
Remove the basket
C
resting on the
slides.
Push the bottom
basket slides back
until the slide mechanism self retracts.
49-60764
8
A
B
C
3 Screws
E
Hex head
bolts
G
REMOVE THE FREEZER
BASKET SLIDES
Remove the upper and lower baskets as shown
in Step 7.
Remove the clip on the crossbar
located along the right hand
side of the rack and pinion gear
assembly by sliding forward.
Remove crossbar by sliding to the
right, then pull out and to the left.
2
and remove side supports.
Reverse the steps to assemble. When installing
the crossbar, always put the hole on the right
hand side. Align the left and
right gears with the timing
marks on the gears when
inserting the crossbar. Always
insert the crossbar in the right
hang gear first and then the
left hand gear.
2
the right hand side.
Clip
1
Hole for clip
Timing
mark
1
Clip
31

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido