Rampage ACD-16 Manual Del Usuario página 12

1. Switch the vehicle ignition and radio "on".
2. Press the Time/Frequency button to call the time display.
3. Press and hold in the Time/Frequency Selector button
time display will blink.
4. Press the VOL
to adjust the minutes to the correct time.
5. Five seconds after the last hour or minute adjustment is made, the time will be set in
the unit and the display will return to the normal indication.
ER-1: Indicates excessive temperature conditions at the CD changer. The error code
will go off and play will resume when the temperature at the changer returns to a
normal range.
ER-2: Indicates the disc is not loading or ejecting properly. Try re-loading or pressing
the Eject button. Check the condition of the disc in use or try another disc.
ER-3: Not user serviceable, contact an approved warranty station near you for
further assistance.
ER-4: Not user serviceable, contact an approved warranty station near you for
further assistance.
ER-5: Not user serviceable, contact an approved warranty station near you for
further assistance..
ER-6: Not user serviceable, contact an approved warranty station near you for
further assistance..
ER-7: Not user serviceable, contact an approved warranty station near you for
further assistance.
ER-8: Not user serviceable, contact an approved warranty station near you for
further assistance.
ER-9: Eject the disc, make sure it is clean, undamaged and loaded correctly (label
side up).
ER-10: Not user serviceable, contact an approved warranty station near you for
further assistance.
ER-11: Indicates that there is no magazine loaded in the CD Changer.
11 11 11 11 11
SET SETT T T T T ING THE CLOCK SET ING THE CLOCK ING THE CLOCK
SET SET ING THE CLOCK ING THE CLOCK
button to adjust the hours and AM/PM indication and VOL
CD PL CD PL CD PL CD PL CD PLA A A A A YER ERR YER ERROR CODES YER ERR YER ERR YER ERR
cn
with the time displayed. The
OR CODES OR CODES OR CODES OR CODES
button
128-5807C
12 of 44