Technical Data - Beper 90.836 Manual De Instrucciones

Electric Tea pot Use instructions
REMOVAL OF MINERAL DEPOSITS
Your tea kettle should be periodically descaled as the mineral deposits in tap water may form scale
on the bottom of tea kettle so as to cause the operation less efficiency. You can use the commercial-
ly available descaler and follow the instructions on the package of descaler. Alternatively, you may
follow below instructions using the white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then adding water to the max level. Leave the solution
in the tea kettle overnight. Do not place tea in the filter.
2. Then discard the mixture in the tea kettle, then filling the tea kettle with clean water, boiling and
then discard the water. Repeat several times until the odor of vinegar has been flushes away. Any
stains remaining inside the spout can be removed by rubbing with a damp cloth.

TECHNICAL DATA:

Power: 600W
Power supply: 220-240V-50-60HZ
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
11
EN