Work Pro NEO 3 Manual De Uso página 2

Wall-mount bracket
1
62
figure 1
figure 2
figure 3
figure 4
1
2
3
4
2
Use the wall mounting part (1) to mark the fixing points on the wall.
Take into account the dimensions between holes and the diameters
marked in figure 1.
Drill wall and insert wall fixings. Screw wall mounting part to wall.
Ensure that suitable screws and wall fixings are used.If in any
doubt contact a suitably qualified expert.
Pass the threaded ball piece (2) through the fixation nut (3)
and screw it directly over the loudspeaker
Move the complete set (loudspeaker+ ball threaded + locking
nut) to the wall-mount piece (1). See figure 3.
Screw the locking nut (3) until to achieve a good fixation. During
this process, you can move the loudspeaker in order to obtain
the desired emmition angle. After finished this process you
can tighten the locking nut. See figure 4.
2
Rear wall mounting part
Threaded Ball
Locking nut
Fixation screw (x2)
3
User Manual/Manual de Uso
EN
4
NEO Series