Power Supply - JVC RC-EX25S Manual De Instrucciones

Sistema portatil con cd
Ocultar thumbs Ver también para RC-EX25S:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 93

POWER SUPPLY

Operation on household AC
Connect the AC power cord.
CAUTIONS:
• Use only with the JVC power cord provided with this
unit to avoid malfunction or damage to the unit.
Remove batteries when using the power cord.
• Be sure to unplug the power cord from the outlet when
going out or when the unit is not in use for an extended
period of time.
Operation on batteries
Loading batteries
1 Open the battery cover.
Pull the battery cover toward you while pressing the
sections marked by the arrows.
2 Insert six R20 (SUM-1)/D (13D)-size batteries.
Be sure to insert the batteries with the ª and ·
terminals positioned correctly.
R20 (SUM-1)/D (13D)-size batteries
3 Replace the cover.
3
AC IN
Checking batteries
When the tape speed or output sound level decreases, or
CD playback becomes intermittent, replace all batteries
with fresh ones.
When making an important recording, use new batteries
(preferably alkaline batteries for a longer service life) to
avoid any possible failure.
For better battery usage
• Continuous operation of the unit causes the battery
power to be consumed more quickly than
noncontinuous operation.
• Operation of the unit in a cold place causes the battery
power to be consumed more quickly than in a warm
place.
CAUTIONS:
• When not using the unit for a long time (more than
two weeks) or when using the household AC, remove
the batteries to avoid a malfunction or damage to the
unit.
• When the JVC power cord provided with this unit is
connected, the power is automatically switched from
the batteries to the household AC even when the
batteries are loaded.
However, remove the batteries when using the power
cord.
CAUTIONS WHEN USING BATTERIES:
When batteries are used incorrectly, it may result in
the leakage of chemicals from the batteries or they
may explode. The following care should be taken:
• Check that the positive ª and negative ·
terminals of the batteries are positioned correctly
and load them as shown in the figure on the left.
• Do not mix new and old batteries together, or mix
different types of batteries.
• Do not try to recharge non-rechargeable batteries.
• Remove the batteries when the unit is not to be used
for an extended period of time.
If chemicals from the batteries come in contact with
your skin, wash them off immediately with water. If
chemicals leak onto the unit, clean the unit
completely.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Rc-ex25se

Tabla de contenido