Blowing Feature - Sears Craftsman CMXEVBE175840 Manual De Instrucciones

Blowing Feature (Fig. L)
Your Vac features a Blowing Port. It can blow sawdust and
other debris. Follow the following steps to use your Vac
as a Blower.
1. Locate Blowing Port of your Vac.
2. Insert the Locking End of the Hose Assembly into the
Vac Blowing Port. The Hose should snap into place.
To Remove the Hose from the Vac, press the Release
Button in the Hose Assembly and pull the Hose out of
the Vac Blowing Port.
3. (Optional) Attach the Extension Wand to opposite end
of Hose, then place the Car Nozzle on the Wand.
4. Turn Vac on and you are ready to use your Vac as a
Blower.
SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 11
WARNING:
!
Always wear safety eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before using as a blower.
WARNING:
!
To reduce the risk of injury to bystanders, keep them
clear of blowing debris.
CAUTION:
!
Wear a dust mask if blowing creates dust which might
be inhaled.
CAUTION:
!
To reduce the risk of hearing damage, wear ear
protectors when using the Vac / Blower for extended
time or in a noisy area.
Fig. L
20 Gallon (75 Liters) Shown
Blowing
Port
Locking
Hose
End
Swivel
End
Of Hose
Extension
Wand (Optional)
Car Nozzle
(Optional)
11
2/22/19 10:31 AM