Technical Specification; Before The First Use - Kasanova KWI000039NOC Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

HAIR DRYER
DESCRIZIONE DELLE PARTI
1. Heat setting
2. Power switch
3. Cool shot button
4. Handle
5. Removable filter
6. Concentrator
7. Hanging loop

TECHNICAL SPECIFICATION

Model
:AHD 2131
Voltage
:220-240V, 50/60Hz
Power
:1600W
Motor
:DC

BEFORE THE FIRST USE

1. Take the appliance and accessories out of the box. Remove the stickers,
protective foil or plastic from the device.
2. Before use clean the appliance with a damp cloth.
3. During the first use there could be some smoke and a burning smell.
This happens because the appliance is new. It will disappear after a few
minutes. This does not mean there is a malfunction and it will not cause
one.
4. This appliance is equipped with a thermostat that switches off the device
when the temperature gets too high, this is often the result of a partially
blocked air inlet and/or exhaust. When the thermostat switches off the
device, turn it off and allow it to cool down. Once the device is cooled
down, the thermostat will automatically be reset and you can resume the
use of it. Do not block air vents during use. Periodic cleaning of the air
intake vent is necessary in order to maintain its performance. During use,
the hot air exhaust tube will get hot so avoid all contact with it.
USE
1. Unwind the power cord and insert the plug into the socket.
2. Adjust the heat level with the heat switch.
3. Adjust the blowing level with the power switch.
4. By pressing the cold shot button it is possible to interrupt the heating
process so that the air can be mixed according to individual requirements.
5. Switch off the dryer and remove the power cord out of the socket.
6. Allow the appliance to cool down.
instruction manual
7

Publicidad

Tabla de contenido
loading

Tabla de contenido