Fermax SKYLINE DUOX Manual De Instalador página 19

DUO DUO X X X X X A A A A A udio Sk DUO udio Sk udio Sk
DUO DUO udio Sk udio Sk yline
DUO DUO DUO X X X X X A A A A A udio Sk udio Sk udio Sk
udio Sk yline
DUO DUO udio Sk
Configuration - Programming the Amplifier
The DUOX amplifier can be configured to allow for the operation
as a general entrance, block entrance or sub-block entrance.
•
The DUOX system uses 6 digit house terminal addresses.
•
These call code digits are organised as follows: BBSSNN:
- BB: indicates the Block number, (from 00 to 99).
- SS: indicates the sub-Block number, (from 00 to 99).
- NN: indicates the sub-Block house number, (from 00 to 99).
You do not have to segregate the installation according to this
hierarchy since the system adapts to the installation´s needs.
IMPORTANT NOTE:
Programming the installer´s parameters.
You can not configure the Skyline buttons panel alone, since it
does not have a keypad for entering the numeric values. You
must temporarily connect a keypad (ref. 7439) to the last button
module to change these parameters (download the Direct Panels
Programming Manual, cod. 97701) at www.fermax.com.
In DIRECT Panel configurations (with keypad), for programming
these parameters, you must download the manual from our
website.
yline yline
yline yline
yline yline
yline
yline
Pag 19