Ibiza sound DJM250BT Manual De Instrucciones página 5

REAR PANEL DESCRIPTION
20. Power Switch
Press down the button to turn on this unit. The LED will illuminate when the power is on.
21. AC Connection
Connect the unit to an appropriate 220-240Vac outlet.
22. XLR BALANCE OUTPUT JACKS
Connect the mixer to a receiver via cables with XLR plugs
23. BOOTH OUTPUT JACKS
Connect the mixer to a second amplifier powering speakers in the DJ booth or in a remote location
24. Master Output
Master output connects to the main amplifier (DJ final mix after crossfader section), accepts RCA jacks。
25. RECORD OUTPUT JACKS
Connect the mixer to a recorder to record your mix. The output signal is the same as on the MASTER jacks.
26. Phono/Line Inputs Sockets
These inputs, for ch1-ch2 and accept RCA-plug connectors. Use phono input socket for phonograph
turntables. Use line socket for CD/MP3 players. Line level musical instruments with stereo outputs such as
rhythm machines or samplers should also be connected with the line input socket.
27. Inputs Switch
Set these switches based on what is plugged into Phono/ Line input jacks
28. GND
Connect the earth cable from the turntables. This helps to reduce humming and pop noise.
USB / SD / BLUETOOTH PLAYER OPERATION
1. SD CARD SLOT
Insert your SD card into this slot.
Note: Before you eject the SD card, please set the playback in pause mode or select another playback support
(USB or Bluetooth)
2. LCD DISPLAY
The LCD display shows information as playback support, file name, elapsed time, total time, file number,
total file number, file system ( MP3 or WMA ) and playback mode ( Repeat one, repeat all, or random. )
Note: In Bluetooth mode, LCD display shows only connection status (connected or disconnected). All playback
information is on the Bluetooth device.
©Copyright LOTRONIC 2014 DJM150BT 5