Cleaning The Rails; Seal; Accessories - Lynx 4HT-416 XP Instrucciones De Uso

Cleaning the rails

Seal

Accessories

20
The rails can be removed for cleaning.
To unhook the rails:
1.
Lift the rails at the front in an upwards direction
2.
and unhook them,
3.
then pull the rails forward
4.
and remove
Clean the rails using either washing up liquid and a
sponge or a brush.
To hook rails back into position:
Insert the rails at the rear, push them backwards
slightly and hook them in at the front.
The rails fit both the left and right sides. Recess (a)
must always be at the bottom.
Clean the seal on the oven with washing up liquid.
Never use caustic or abrasive detergents.
Immediately after use, soak the accessories in
washing up liquid. Food residues can then be easily
removed with a brush or sponge.