Features; Technical Data - Surtek TB512B Manual De Usuario

Lock the engine switch when leaving the bench
drill. Do not perform design, assembly or config-
uration work on the table while the cutting tool
is rotating, on or connected to a power source.
This product, and part of the dust created by
electric sanding, sawing, grinding, drilling and
other construction activities may contain chemi-
cals, including lead. Wash your hands after
handling.
Some examples of these chemicals are:
Lead lead-based paints,
· Crystalline brick and cement dilica and other
masonry products,
· Arsenic and chrome from chemically sawn
wood.
The risk of exposure to these chemicals varies
depending on how often you do this type of
work. To reduce your exposure, work in a well
ventilated area with approved safety equip-
ment, such as dust masks that are specially de-
signed to filter microscopic particles.

FEATURES

KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
Your drill press has been designed for drilling
hales in wood, metal and plastics.
7
9
10
12
13
11
1. BAND TENSION LOCK HANDLE. Squeeze the
locking handles of the motor bracket and the
belt tension handles to maintain a correct dis-
tance and tension in the band.
2. POWER HANDLE. To move the broker from
top to bottom. One or two of the handles can
be removed if necessary when the workpiece
has an unusual shape that interferes with the
handles.
12
8
6
5
4
14
3. TABLE HANDLE. Turn the crank clockwise to
raise the table. The support lock will be released
after operating the crank.
4. CHUCK WRENCH. It is used to tighten the cor-
responding drill in the broker. Also to loosen the
broker and be able to remove the drill.
5. CHUCK. Maintains the drill bit or other rec-
ommended accessory to perform desired opera-
tions.
6. DEPTH SCALE. It allows the operator to adjust
the drill pressure when drilling at the desired
depth.
7. "ON-OFF" SWITCH. Turn the drill on or off.
In addition, it keeps the hole locked in the off
position.
8. DEPTH SCALE LOCK. Lock the depth scale at
the desired position.
9. SPRING COVER. It provides means to adjust
the tension of the broker.
10. HEAD LOCK. Lock the head to the column.
ALWAYS keep the head locked in place while
drilling.
11. BEVEL SCALE. The grade table shows if it is
inclined for bevel operations.
12. SUPPORT LOCK HANDLE. Tighten the table
lock to the column. Always keep it locked in
place while drilling.
13. TABLE BEZEL LOCK. Lock the table in any po-
sition between 0 ° and 45 °.
14. WORK TABLE.

TECHNICAL DATA

TB512B
CHUCK CAPACITY
SPINDLE TAPER
POWER
VOLTAGE-FREQUENCY
1
SWING
2 TABLE SIZE
SPINDLE SPEED
SPEED
3
CHUCK STROKE
WEIGHT
TB558B
CHUCK CAPACITY
SPINDLE TAPER
POWER
VOLTAGE-FREQUENCY
SWING
TABLE SIZE
SPINDLE SPEED
SPEED
CHUCK STROKE
WEIGHT
1/2" (13 mm)
B16#
2/5 HP (300 W)
120 V ~ 60 Hz
8" (203,2 mm)
165 mm x 165 mm
750-3 200 r/min
5
2" (50 mm)
14 kg (30,8 lb)
5/8" (16 mm)
B16#
3/4 HP (550 W)
120 V ~ 60 Hz
10" (254 mm)
197 mm x 193 mm
276-2 950 r/min
12
2-1/3" (60 mm)
26,5 kg (58,4 lb)