Replacing The Brushes; Cleaning The Brushes - Duplex 280i AC Manual De Instrucciones

DUPLEX 280i
MAINTENANCE
7.2.1

Replacing the brushes

The appliance is fitted with a patented "trigger fitting" which enables the brushes to be
removed and replaced in a few seconds.
In case of wearing, warping or simply for replacement of the brushes with brushes more
suitable for the type of cleaning required, proceed as follows:
1) Remove the brushes 7 pressing the release device 9 (figure A).
2) Fit the new or optional brushes (figure B).
7.2.2

Cleaning the brushes

Check the status of the brushes 7, and if necessary, proceed as follows:
1) Remove the brushes 7 pressing the release device 9 (figure A).
2) Immerse them in a container of cold or lukewarm water and let them soak for a few
hours.
3) Stir and rinse well.
4) Refit the brushes reversing their original position. This is necessary as the bristles
tend to bend when the brushes always rotate in the same direction.
9
7
B
A
9
7
124
7
7
F.24
Rev.
1.1