Troubleshooting - SOLAC CD7901 Instrucciones De Uso

teeth with a small forward and
backward movement.
To maximize the effectiveness of
•
the cleaning, divide your mouth
into 4 sections. Begin with sec-
tion 1 and brush each section
for 30 seconds. The brushing
action will pause briefly between
each 30-second interval, indicat-
ing when to move on to the next
section. The toothbrush will stop
automatically after 2 minutes of
use. (Fig. 3).

TROUBLESHOOTING:

Problem
The toothbrush does
not work.
Weake or diminished
vibration.
The toothbrush
operates only for a
short period of time
even immediately after
being charged.
STAND-BY FUNCTION:
In order to save energy, the ap-
•
pliance passes to stand-by after
2 minutes if the user does not
use it.
To return to normal operation
•
simply press the appliance's on/
off button.
ONCE YOU HAVE FINISHED
USING THE APPLIANCE:
Turn the appliance off using the
•
on/off switch.
Unplug the appliance from the
•
mains.
Clean the appliance.
•
Possible cause
You have just
purchased the product
or it has not been
used for more than 3
months.
The toothbrush is
pressed hard against
your teeth.
The battery has
reached the end of its
life cycle.
Charging time was
insufficient.
EN
Solution
Charge the main
unit for at least 24
hours.
Place the
toothbrush head
gently on the
teeth.
Contact our
customer service
department for
further assistance.
Charge the main
unit for at least 24
hours.