Drill Safety Warnings; Standard Accessories; Prior To Operation - Metabo HPT D 10VF Instrucciones De Manejo

English

DRILL SAFETY WARNINGS

1. Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
2. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
SPECIFICATIONS
Model
Voltage (by areas)*
Power input
No load speed
Drill chuck capacity
Twist Bit
Steel
Hole Saw
Flat Spade Bit
Capacity
Wood Auger Bit
Hole Saw
Weight (without cord)
Spec. for keyed chuck
Spec. for keyless chuck
* Be sure to check the nameplate on product as it is subject to change by areas.
<Capacity with Angle attachment (Optional accessory for D13VF and D13VG)>
Model
Speed of angle unit
Twist Bit
Steel
Hole Saw
Flat Spade Bit
Capacity
Wood Auger Bit
Hole Saw

STANDARD ACCESSORIES

<D10VF>
(1) Chuck wrench (Spec. only for keyed chuck) .................1
<D10VG and D13VF>
(1) Side handle ...................................................................1
(2) Chuck wrench (Spec. only for keyed chuck) .................1
<D13VG>
(1) Side handle ...................................................................1
(2) Handle joint ...................................................................1
(3) Chuck wrench (Spec. only for keyed chuck) .................1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
<D10VF>
(1) Side handle
(2) Hook (A)
<D10VG>
(1) Hook (A)
<D13VF and D13VG>
(1) Hook (A)
(2) Angle attachment
Optional accessories are subject to change without notice.
5
3. Hold the drill and side handle securely with both hands
when using.
4. Do not wear gloves made of stuff liable to roll up such as
cotton, wool, cloth or string, etc.
5. Prior to drilling into walls, ceilings or fl oors, ensure there
are no electric cables or conduits inside.
D10VF D10VG
(110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
0 – 3000/min 0 – 1200/min
10 mm
10 mm 10 mm
– 38 mm
25 mm 32 mm
–
29 mm 70 mm
1.8 kg 1.9 kg
1.8 kg 1.9 kg
D13VF
LOW (650/min) HIGH (1350/min)
13 mm 13 mm
64 mm 32 mm
40 mm 32 mm
38 mm 29 mm
114 mm 64 mm
APPLICATIONS
○ Boring holes in metal, wood and plastic.

PRIOR TO OPERATION

1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specifi ed on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position. If the
plug is connected to a receptacle while the power switch
is in the ON position, the power tool will start operating
immediately, inviting serious accident.
3. Extension cord
When the work area is removed from the power source.
Use an extension cord of suffi cient thickness and rated
capacity. The extension cord should be kept as short as
practicable.
4. Selecting the appropriate drill bit
○ When boring metal or plastic
Use ordinary metalworking drill bits.
D13VF
710 W*
0 – 850/min
13 mm
51 mm
40 mm
– 32 mm
102 mm
2.1 kg
2.0 kg
LOW (400/min)
13 mm
70 mm
40 mm
38 mm
114 mm
D13VG
0 – 600/min
13 mm
13 mm
70 mm
40 mm
38 mm
114 mm
2.1 kg
2.0 kg
D13VG
HIGH (900/min)
13 mm
51 mm
40 mm
32 mm
102 mm