4.2 Software Notes
Use only the device driver provided by FUJITSU with this drive.
for PC users
•
Do not use the "Disk Copy" command (Right mouse button menu or
from the Explorer as it does not support any 2KB/sector removable
media including 640MB MO disks and 1.3GB MO disks.)
•
You must use Windows 98 Second Edition (4.10.2222A) or above with
this product. To confirm the Windows version, Right-click [My
Computer] and select [Properties].
4.3 Q & A
Although the DynaMO is designed to be highly reliable, you may occasionally
experience problems. This section describes problems you may encounter
when using your DynaMO. If you experience any problems other than those
outlined below, contact your dealer or FUJITSU subsidiary.
Q1: The PC hangs.
A1: – Did you connect or disconnect an IEEE1394 cable while the Busy
Indicator of the DynaMO is on?
– You may need the supplemental power supply.
– Are the Fujitsu device drivers installed?
Q2: When is the AC adapter required?
A2: You must use the supplemental power supply in the following
configurations:
– With a laptop computer
– With multiple IEEE1394 devices at a same time
– If your IEEE1394 attachment card can not supply 9w. See your
adapter card manual for details.
– When used with a PC/adapter-card with a 4pin IEEE1394
connector.
1.22