MILK FROTHER
Fig 1
Open the lid of the appliance.
Fig 2
Press the blender into the pot.
Fig 3
Pour milk into the pot, at a maximum of 250 ml, which is the
level marked with – Max. If more milk is poured into the pot you
risk an overflow of warm milk!
Fig 4
Close the lid of the appliance.
Fig 5
Put the pot onto the support base. Check that the electrical plug is
inserted into the mains socket.
When you need to speed up to work the appliance, please wet the
bottom of the pot with little tap water. See the Fig.
Fig 6
On the support base, pushing the button iteratively leads to the
following: Blue sign
run with heating. When you firstly start the appliance, the indicator
light will be on and the blender start to rotate the milk. In about
60 – 240 seconds, the appliance will stop automatically and the
light will be off. The pot is now filled with hot luscious milk
foam that can be poured in your coffee cup. When you need to
stop the appliance to work on halfway, you can repeat to press the
switch and it will stop immediately.
OPERATION - HOT CHOCOLATE
instruction manual
is to run without heating; Red sign
9
is to