KIT NCB ASP1/ASP2
SUCTION
GB
Instruction manual
The images shown in this manual may not correspond entirely with the final product.
1. SAFETY.
Safety warning for persons and things.
The following set of symbols
side a text indicates a potential hazard if the
appropriate instructions are not heeded.
DANGER.
!
Failure to heed this warning involves a risk of
injury to persons.
ATTENTION.
!
Failure to heed this warning involves a risk of
damage to the equipment or the installation
1.1. Basic safety and damage-prevention
recommendations.
To reduce the risk of drowning from hair and body
entrapment:
Install suction fittings with a marked flow rate
!
(según características del fabricante), that
exceeds the flow rate of your system by at
least 25%.
!
ALWAYS USE MULTIPLE SUCTION
OUTLETS.
!
If the fitting/cover breaks, is damaged, or is
missing, shut the system down immediately .
Do not use the system until the covers have
been replaced.
Notice to bather
!
Keep hair and clothing a minimum of 30 cm
away from all suction fittings and drains at all
times. Persons with long hair should either
secure hair to a minimum lenght or wear a
bathing cap.
C h i l d r e n s h o u l d n e v e r b e l e f t
!
unsupervised/unattended at any time in a
swiming pool.
!
!
along-
ASP1
Be sure the temperature of the water never
!
exceeds the manufacturer 's recom-
mendations.
Maximum admissible flow
Hydraulic connections
2.
INSTALLATION
2.1
Liner swimming pools
2.2
Polyester, wood and prefabricated
swimming pools
2.2
Masonry swimming pools
ASP2
45 m3/h
Ø63 mm solvent socket