6
www.electrolux.com
It is possible to change predefined sound
of buttons to a loudly one by pressing
together light button and temperature
Display
A
After selection of the top or
bottom compartment the
animation
After selection of the
temperature the animation
flashes for a few minutes.
3.2 Switching on
1. Connect the mains plug to the power
socket.
2. Press ON/OFF if the display is off.
If DEMO appears on the display, the
appliance is in demonstration mode.
Refer to "What to do if...".
The temperature indicators show the set
default temperature.
To select a different set
temperature refer to
"Temperature regulation".
3.3 Switching off
Press ON/OFF for 3 seconds.
The display switches off.
To disconnect the appliance from the
power, disconnect the mains plug from
the power socket.
3.4 Temperature regulation
1. Select the top or bottom
compartment.
2. Press the temperature button to set
the temperature.
B
C
starts.
colder button for some seconds. Change
is reversible.
A) Bottom compartment temperature
indicator
B) Alarm indicator
C) Top compartment temperature
indicator
3. Set the default temperature for the
top compartment (+8°C) and for the
bottom compartment (+14°C)
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours.
Refer to "Daily Use- Wine Arrangement".
After a power failure the set
temperature remains stored.
3.5 Light button
If you want to maintain light on with the
door closed, it is sufficient to open and
close the door and the light will remain
ON automatically for 10 minutes.
If you want to switch off the light before
the automatic turn off time, open the door
and press the light button.
3.6 Door open alarm
An acoustic alarm will sound if the door is
left open for a few minutes. The door
open alarm conditions are indicated by:
• flashing alarm indicator;
• acoustic buzzer.
When normal conditions are restored
(door closed), the alarm will stop. During
the alarm, the buzzer can be switched off
by pressing any button.