Water Reservoir - Unold 86990 Instrucciones De Uso

DE
5. In addition, ensure that the appliance is not set up on deep-pile carpets or
in dusty environments.
EN
6. For safety reasons, the appliance must not be used in the vicinity of sinks,
bathtubs, or water connections.
FR
7. Ensure that the electrical outlet that is used is easily accessible at all times.
NL
8. Check whether the power cord is routed in such a manner that no one can
stumble over it.
IT
9. When you operate the appliance with fan and cooling function, keep doors
and windows closed. This ensures effective, energy-efficient cooling.
ES
PL

WATER RESERVOIR

1. Switch off the appliance via the ON/OFF button and unplug the power plug
from the electrical outlet.
2. Pull the reservoir slightly to the rear and out of the appliance. Please note
that in this process the water reservoir cannot be taken out completely,
because the pump of the appliance is fastened in the water reservoir.
3. Fill the reservoir with extremely cold water, if need be you can add ice cubes
to obtain a better cooling result.
4. The water must not be over 40°C.
5. The water reservoir must be filled with 1,000 ml of water (max. 2,000 ml),
otherwise the pump in the reservoir cannot function properly.
6. Slide the reservoir back into the appliance.
26 von 88
Copyright UNOLD AG | www.unold.de
7. To empty completely, unlock
the water tank by turning the
locking clip on the housing to
the left or right.
8. Gently pull the water tank
slightly out of the appliance.
9. Turn the pump support loca-
ted in the water tank forward
until the pump can be gently
pulled upwards.
10. Be careful not to damage or
loosen the cable and hose of
the pump.
Stand 18.6.2020