How To Use This Manual - MTX Audio THUNDER 6152 Manual Del Propietário

AMPLIFIERS
Introduction
CONGRATULATIONS...
on your purchase of a new MTX Audio
Thunder Amplifier! MTX has long been
the industry leader in mobile enclosures
and speakers, and we have reached
new heights with the development of the
new MTX Thunder amplifiers. You
couldn't have chosen a more reliable,
powerful, or better performing amplifier.
In fact, we back up every Thunder
amplifier with a three-year warranty if
installed by an authorized MTX Audio
retailer (see the warranty statement).
Your new MTX Thunder amplifier was
designed, built and thoroughly tested at our
state-of-the-art electronics manufacturing
facility in Phoenix, Arizona. We manufacture
every amplifier using the latest Intelligent
Surface Mount Technology. Some of the
advantages of the new design are its signifi-
cant improvements to the amplifier's electrical
and mechanical properties. ISMT devices
feature substantially shorter internal and
external lead lengths. This reduces stray
capacitance and inductance, which results in
cleaner and more accurate musical reproduc-
tion with significantly less noise interference.
The ISMT mounter produces amplifier boards
with smaller and lighter components, which
are more resistant to vibrations inherent in the
automotive environment.
A word about power ratings. It is important for you
to know how they stack up. MTX has chosen the
most honest, most conservative way to rate our
amps. We show you the RMS power, at 12.5 volts,
and dynamic power at 14.4 volts. However, we go
above and beyond the call of duty. We test each
amplifier. The technician records the "actual"
power output, and records this number on your
Certified Performance Certificate. The amplifier
must meet or exceed the rated specification
before we'll ship it. No questions. No exceptions.
We want to ensure you get continuous high
performance from your MTX Thunder
amplifier, so we recommend that you have it
professionally installed by your authorized
MTX dealer.

HOW TO USE THIS MANUAL

If you are installing this amplifier yourself, we
recommend that you read the manual cover-
to-cover before you install it. Familiarize
yourself with the features and details on the
input and output panels. Make sure you have
all the equipment you need. Then follow the
step-by-step installation instructions included.
Sample installation diagrams may be found
on our website:
mtx.com
If you have any questions, write or call us:
MTX Audio
4545 E. Baseline Rd. Phoenix, AZ 85042
602-438-4545 • 800-CALL MTX
technical@mtx.com
mtx.com
Please take a moment to register your
purchase on line at mtx.com.
Please also record the serial number of
your amplifier in the space provided below
and keep this manual for future reference,
as well as your sales receipt as proof of
ownership. (The serial number of your
amplifier is marked on the bottom of its
metal chassis.)
Serial Number:
Date of Purchase:
Features
• Intelligent Surface Mount Technology
• Patented PWM MOSFET Switching Power Supply (#5,598,325)
• Class A 100% Discrete Driver Circuit Topology
• New, more reliable high powered transformers
• Pure N-Channel Design
• Speaker and low level inputs inputs on Thunder6152
• Color-coded wire harness for speaker-level input installation on Thunder6152
• Smart-Engage™ auto turn on for easy integration with factory head units (Thunder6152 only)
• Input select 2CH/4CH switch on Thunder6304 functions as a built-in Y connector
• Real Time Computerized Protection Circuit
• Acoustically Seamless Turn-on/Turn-off (i.e. no noise)
• Continuously variable/defeatable 12dB/octave high pass, 24dB/octave mono low pass crossover (variable from 40Hz to 200Hz)
• Continuously variable/selectable crossover output, switchable from full range/high pass/low pass outputs (Full range only on
Thunder6304)
• EBC Max on Thunder 8302, allows for control of additional subwoofer amps in a daisy chain configuration in low pass mode
• Continuously adjustable and defeatable Thunder EQ Bass enhancement circuitry, centered at 40Hz
• Left and right individually adjustable input sensitivity (Except for Thunder6304)
• Nickel-plated, heavy duty terminal block type connectors
• Unique rubber Insulated Iso-Feet™
• Buffered, isolated output for daisy chaining multiple amplifiers
Specifications
THUNDER6152
RMS Power measured at 12.5 Volts DC:
37.5 Watts x 2 into a 4 Ohm load with less than 0.1% Thd+N
75 Watts x 2 into a 2 Ohm load with less than 0.1% Thd+N
150 Watts bridged into a 4 Ohm load with less than 0.1% Thd+N
Dynamic Power measured at 14.4 Volts DC
90 Watts x 2 into a 4 Ohm load
165 Watts x 2 into a 2 Ohm load
325 Watts bridged into a 4 Ohm load
Signal to Noise Ratio: ≥110dB A-Weighted
Damping Factor: >200
Frequency Response: 20Hz-20kHz ± 0.25dB
Maximum Input: 8Vrms
Thunder EQ: Variable Bass Boost (0-18dB) centered at 40Hz
Crossover: Variable 40Hz to 200Hz, 12dB/octave high pass,
24dB/octave low pass with mono output
Dimensions: 8.3" x 9.75" x 2" (21.1cm x 24.8cm x 5.1cm)
10.7" x 9.75" x 2.1" (27.2cm x 24.8cm x 5.3cm) Including IsoFeet™
THUNDER8302
RMS Power measured at 12.5 Volts DC:
75 Watts x 2 into a 4 Ohm load with less than 0.1% Thd+N
150 Watts x 2 into a 2 Ohm load with less than 0.1% Thd+N
300 Watts bridged into a 4 Ohm load with less than 0.1% Thd+N
Dynamic Power (IHF-202 Standard) measured at 14.4 Volts DC
120 Watts x 2 into a 4 Ohm load
212 Watts x 2 into a 2 Ohm load
425 Watts bridged into a 4 Ohm load
Signal to Noise Ratio: ≥110dB A-Weighted
Damping Factor: >200
Frequency Response: 20Hz-20kHz ± 0.25dB
Maximum Input: 8Vrms
Thunder EQ: Variable Bass Boost (0-18dB) centered at 40Hz
Crossover: Variable 40Hz to 200Hz, 12dB/octave high pass,
24dB/octave low pass with mono output
Dimensions: 9.2" x 9.75" x 2" (22.8cm x 22.8cm x 5.1cm)
11.5" x 9.75" x 2.1" (29.2cm x 24.8cm x 5.3cm) Including IsoFeet™
THUNDER6304
RMS Power measured at 12.5 Volts DC:
37.5 Watts x 4 into a 4 Ohm load with less than 0.3% Thd+N
75 Watts x 4 into a 2 Ohm load with less than 0.3% Thd+N
150 Watts x 2 bridged into a 4 Ohm load with less than 0.3% Thd+N
Dynamic Power (IHF-202 Standard) measured at 14.4 Volts DC
90 Watts x 4 into a 4 Ohm load
165 Watts x 4 into a 2 Ohm load
325 Watts x 2 bridged into a 4 Ohm load
Signal to Noise Ratio: ≥110dB A-Weighted
Damping Factor: >200
Frequency Response: 20Hz-20kHz ± 0.25dB
Maximum Input: 8Vrms
Thunder EQ: Variable Bass Boost (0-18dB) centered at 40Hz
Crossover: Variable 40Hz to 200Hz, 12dB/octave high pass,
24dB/octave low pass with mono output
Dimensions: 11.5" x 9.75" x 2" (29.2cm x 24.8cm x 5.1cm)
13.9" x 9.75" x 2.1" (35.3cm x 24.8cm x 5.3cm) Including IsoFeet™