Replacing The Adf Pad - Oki MC560 Referencia Rápida

Maintenance

Replacing the ADF Pad

After scanning approximately
100,000 pages through the ADF, the
pad module can become worn out
and can cause feeding problems.
Note
One replacement ADF pad is
included with your unit. It is stored
behind a swing-down cover (1) on
the back of the unit:
For additional ADF pads, order
Oki P/N 43103001 (see "Where
to Purchase" on page 30).
1. Open the ADF cover.
2. Press the white plastic arms on the
sides of the ADF pad inward and
pull the pad out.
3. Press both arms of the new ADF
pad inward. Place the pad into the
holder until it snaps into place
4. Close the ADF cover.
36 English
•