Descargar Imprimir esta página

Cleaning, Maintenance And Storage - senya SYIR-I010 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

released when the temperature knob is set to the maximum position (Linen-Cotton, with the
'steam' symbol)
Position
o
Position
o
Position
o
When the indicator light goes off, pre-heating is complete. During use, the indicator light
illuminates when the temperature is resetting. It is recommended to wait until the indicator light
goes off before using the steam function.
USE
III.
1- The crease-removing method
Hang the garment on a hanger, then gently run your hand along the garment to ensure that there are
no hidden items which could potentially be damaged by the steam.
Ensure that the garment pockets are empty.
Pull the trigger to activate the steam.
Press the soleplate onto the fabric. Glide across the garment slowly and pull it with your free hand.
Release the trigger to allow the garment steamer to refill and reactivate the steam.
2- The ironing method
The garment steamer may be used as an iron. It is equipped with a ceramic-coated soleplate for
optimum gliding on a variety of fabrics. You can also use the steam function during ironing.
AFTER EACH USE
IV.
After each use, always turn the thermostat to the OFF position.
Switch the appliance off by unplugging the power cord from the electrical socket.
Empty the water tank into a sink or bucket.
Place the garment steamer on its base and allow it to cool before storing.
You can store the garment steamer either horizontally or vertically by hanging it up using its loop
(3).

CLEANING, MAINTENANCE AND STORAGE

Do not use coarse abrasives, aggressive cleaning products or solvents.
Do not immerse the garment steamer in water or other liquids.
Do not attempt to disassemble the appliance.
Before cleaning, unplug the appliance and allow it to cool for 1 hour.
Always empty the water tank, then rinse it with clean water before storing the garment steamer.
Always ensure that the appliance is cool and dry before storing.
Add 50% water plus 50% white vinegar fill in mix in the water tank of appliance. Wait for 12
: Synthetics, the steam function is not activated.
••
: Wool, the steam function is not activated.
•••
: Linen-Cotton, the steam function is activated.
23

Publicidad

loading