Brandt BDVDP1050 Manual De Uso página 5

Battery handling and usage
Remote control battery:
The battery should only be replaced by adults. Do not allow children to
use the remote control unless the battery cover is attached.
The battery type used in the remote is one CR2025 3V
Lithium battery which is accessible and can be replaced.
Remove the battery holder located on the bottom of the
remote control to remove the battery.
Incorporated Battery
The battery type used in the unit is one lithium battery. The battery is
in‐cooperated and is not readily accessible.
The battery must be disposed of at your local recycling point.
Installing Remote Control Battery
○ ○
Push 1 and pull 2 to slide out the battery holder from the remote
control and insert one 3V CR2025 lithium battery in the battery holder
with the print face up, then replace the battery holder.
WARNING:
To save power: switch off mains power or pull out the power adapter
plug when you are not using the apparatus.
1