Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
Thank you for purchasing the Phonic Versatap Series of spealers.
These compact, weather-resistant speakers are designed for clear,
articulate sound reproduction in many defferent applications. For
your convenience, Versatap speakers are available in both black
and white colors. Each speaker is equipped with 100V transformer
with 4 tap positions, and an 8 ohm bypass position. 100V and 8
ohm operation are not interchangeable, and doing so will damage
the speaker, amplifier, or both units. Please verify which you will
be using before applying signal to the speaker.
CAUTION: This is not a waterproof unit, so exposure to water
may cause damage to the speaker and/or electrical shock. Please
observe the maximum allowable power rating to prevent overload-
ing and damage the speaker.
SPECIFICATIONS
MAXIMUM POWER RATING
FREQUENCY RESPONSE
SENSITIVITY
WOOFER SIZE
TWEETER SIZE
100 TAP POSITIONS
VC DIRECT
DIMENSION
4
When installing the Versatap speakers, please position them in
a manner that reduces exposure to the elements (water, snow,
sun, etc). This will increase the life of the speakers and protect
the speaker cones from damage. Versatap sperlers should be
pointing downwards or horizontally to prevent accumulation of
water in the speaker.
It is recommended that you mount the U-mount or RK-15 universal
swivel mount brackets to the desired location first before attach-
ing the speaker. This will allow the speaker to be aimed properly.
Please do not overtighten the speaker mounting knobs, as this
will damage the mounting threads.
VERSATAP 30
30 WATTS (8 OHM)
120HZ~20KHZ (±3DB)
84DB
4" POLYCARBON
1" SOFT DOME
2, 4, 8, 16 W
8 OHMS
7-1/4" X 4-1/2" X 4-1/4"
VERSATAP 50
50 WATTS (8OHMS)
75HZ~20KHZ (±3DB)
90DB
6.5" POLYCARBON
1" SOFT DOME
2.5, 5, 10, 20 W
8 OHMS
11-1/2" X 7-3/4" X 8-1/4"
VERSATAP30 / VERSATAP50
Publicidad
