Product Description And Specifications - Bosch PSM 200 AES Manual Original

12 | English
Safety Warnings for Sander
 Use the machine only for dry sanding. Penetration of wa-
ter into the machine increases the risk of an electric shock.
 Pay attention that no persons are put at risk through
sparking. Remove any combustible materials in the vi-
cinity. Sparking occurs when sanding metal materials.
 Caution, fire hazard! Avoid overheating the object be-
ing sanded as well as the sander. Always empty the
dust collector before taking breaks. In unfavourable
conditions, e. g., when sparks emit from sanding metals,
sanding debris in the dust bag, micro filter or paper sack
(or in the filter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with remainders of var-
nish, polyurethane or other chemical materials and when
the sanding debris is hot after long periods of working.
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for dry sanding and polishing of
wood, plastic, metal, filler, as well as for painted surfaces. It is
especially suitable for profiles, corners or hard to reach loca-
tions.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Speed regulator
2 On/Off switch
3 Filter element (Microfilter System)
4 Dust box, complete (Microfilter System)
2 609 007 196 | (22.11.13)
5 Ventilation openings
6 SDS button for release of the sanding plate
7 Front sanding plate
8 Rear sanding plate
9 Rectangular sanding plate
10 Handle (insulated gripping surface)
11 Extraction outlet
12 Vacuum hose*
13 Sanding sheet*
14 Pad extender*
15 Sanding sheet for extender*
16 Narrow pad extender*
17 Narrow rounded pad extender*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Multi Sander
Article number
Rated power input
No-load speed
No-load orbital stroke rate
Sanding sheet surface
Sanding sheet surface – rectangular
Orbit diameter
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
Noise/Vibration Information
Measured sound values determined
according to EN 60745.
Typically the A-weighted noise levels
of the product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector
h
sum) and uncertainty K determined
according to EN 60745:
a
h
K
PSM 200 AES
3 603 CB6 0..
W 200
-1
min 3000 –13000
-1
min 6000 –26000
2
cm 104
2
cm 164
mm 1.8
kg 1.4
/II
dB(A) 83 86
dB(A) 94 97
dB 3 3
2
m/s 6.0 7.0
2
m/s 1.5 1.5
Bosch Power Tools