Publicidad
Be tje nings vej led ning
Tak, fordi De købte et Nilfi sk-ALTO dyserør.
Læs denne vejledning, inden dyserøret tages i brug.
Dyserør med trykregulering
For at opnå maskinens max. arbejdstryk, skal dyse-
rørets reduktionsventil (A) være helt lukket (max).
Ønskes helt reduceret tryk, men fuld vand mæng de,
åbnes reduktionsventilen helt (min).
Justering af spredevinkel -
Powerspeed Vario Plus
Til specielt krævende opgaver tilpasses dysens
spredebillede trinløst fra 0-20° på én omdrejning
(B).
Brug af rengøringsmidler
Når en ekstern kemiinjektor benyttes, skal reduk-
tionsventilen være åbnet, så der arbejdes under
lavtryk.
Sikkerhed
- Ret aldrig vandstrålen mod elektriske in stal -
la ti o ner eller mod højtryksrenseren.
- Ret aldrig vandstrålen mod mennesker eller dyr.
max.
min.
2
A
65°
65°
20°
20°
Instructions for Use
Thank you for buying a Nilfi sk-ALTO spray lance.
Please read these instructions carefully through
before you start using the lance.
Spray lance with pressure regulation
To obtain max. working pressure, the reduction
valve (A) of the spray lance should be fully closed
(max).
To work with completely reduced pressure by full
water capacity, the reduction valve should be wide
open (min).
Adjustment of spray angle -
Powerspeed Vario Plus
For specially tough cleaning tasks the spray pattern
of the nozzle is infi nitely variable from 0-20° in one
turn (B).
Use of detergents
When using an external chemical injector, open the
reduction valve for operation with low pressure to
allow the addition of detergents.
Safety
- Water jets should never be directed towards elec-
tric wiring or the cleaner itself.
- Water jets should never be directed towards
people or pets.
B
A
A
min.
max.
Publicidad
