Setup; Ac Power; Charging The Battery; Battery Runtime - Chauvet DJ EZMIN FX Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. S
ETUP

AC Power

Charging the
Battery
Battery
Runtime
Battery
Maintenance
Page 12 of 52
The EZMiN™ Laser FX/RBX has an external auto-ranging power supply and it can work
with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product's power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product's back panel, or
refer to the
Technical
Specifications. The listed current rating indicates the product's
average current draw under normal conditions.
·
Always connect the product to a protected circuit (circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
·
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
The EZMiN™ Laser FX/RBX comes with a rechargeable lithium battery for cable-free
operation. To charge the battery, simply plug in the power cord at any time before,
during, or after operation.
The EZMiN™ Laser FX/RBX battery should be charged 24 hours prior to initial use
for optimal battery life.
The maximum runtime for the EZMiN™ Laser FX/RBX battery is up to 6 hours; however,
the operation mode used has a bearing on the final runtime for the battery. To achieve
the maximum battery runtime, set the product in the Sound-Active modes only. When
using the Automatic modes, the battery runtime may be shortened.
To keep the battery in optimal operating condition, store the product in a cool, dry place
and charge at least once every 30 days when not in use.
Avoid exposure to extreme temperatures. If the product is exposed to extreme cold or
hot temperatures, warm up/cool down the product before use and before charging.
EZMiN™ Laser FX/RBX User Manual Rev. 4

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ezmin rbxEzmin fx1006076310060764

Tabla de contenido