- It is important to discharge the battery before it is recharged, leave it on until
it stops or the power decreases clearly.
- The battery must be recharged every 6 months if it has not been used for
said period of time.
- Also recharge if it has not been used for more then a month.
TO PLACE THE ACESSORIES
• The following accessories: the nose-ear, shaver and cutting hair accessory are
placed inserting the lower flange with a slightly pressure.
• To remove them, pull upwards from the 3 slots placed under the blades.
LUBRIFICATION
• For the body shaver (1) and cutting guide accessory (5) work correctly it is
absolutely necessary to lubricate the blades with oil before each use.
• Carefully pour a few drops of oil, which is provided, between the teeth of the
blade, or if you have run out, with another high quality, acid free oil.
• Turn the hair clipper on for a few seconds and clean the excess oil off with a
cloth.
BODY TRIMMER
• Use the body shaver (1) without the cutting guide.
• Before depilation, the skin must be dry and clean, free of oil or cream.
• Pass your hand over the depilation area in the contrary way to the growing hair
to lift up the shorter hair.
• Cut the hair in the opposite direction of its growth.
SHAVER
• Insert shaver (4) on the main unit.
• Do not press it too much in the skin.
NOSE-EAR ACCESSORY
• Place the accessory (2) in the main unit. Insert the groomer into the nostril and
rotate in a circular motion.
• Remove the hair inserting the groomer into the nostril as showed in the
drawing.
• In both cases do not insert the unit more than 0,5 cm.
CUT THE HAIR
• To cut the hair it is compulsory to use the accessory (5) together the cutting
guides (7) that allows a cutting length between 3 and 15 mm.
• To assemble the guide, place it by sliding from its flanges, from the lateral
guides having the wheel in the lower position.
20