Velleman GASMT1 Manual Del Usuario página 4

4. Overview
Refer to the illustrations on page 2 of this manual.
5. Operation
1.
2.
3.
4.
5.
6. Refilling the Gas Tank
1.
2.
3.
4.
5.
6.
7.
V. 02 – 16/11/2020
1 burner
2 air adjustment ring
gas adjustment
3
valve
ignition push
4 button with safety
hook
Release the safety lock under the ignition button (#4) by
pulling it down until it clicks.
Set the air adjustment ring (#2) and the gas adjustment
valve (#3) halfway between open (+) and closed (-).
Press the ignition button (#4) to ignite the GASMT1. You
can keep the ignition button pressed to hold the flame, or
lock the ignition button with the "continuous" button (#5).
Adjust the flame by regulating the gas valve (#3) and the
air ring (#2).
When finished, press and release the ignition button (#4)
to extinguish the flame.
Make sure the device is not burning and the safety lock
(#4) is engaged.
Close all taps, valves and adjustment knobs of the device
before refilling it.
Refill in a well-ventilated area.
Refill with decent quality butane gas only.
Place the torch upside down.
Insert the nozzle of the butane canister into the torch
refilling valve.
Press the canister down until the gas starts to flow.
GASMT1
4
5 continuous switch
6 gas tank
7 refilling valve
8 base
©Velleman nv