Beper 90.354 Manual De Instrucciones página 9

Milk warmer Use instructions
Milk warmer
Turn the thermostat to
while constant temperature reach to 40-47°C.
Heating baby food
Turn the thermostat to
while constant temperature reach to 65-85°C.
Sterilize
Turn the thermostat to
temperature reach to 100°C.
100°C Function
Turn the thermostat to 100°C. indicator light will turn on while heating, and automatically while con-
stant temperature reach to 100°C.
Warning: the steam is very hot. Do not put your hands in the chamber when the appliance is in use.
7- When heating is complete, remove the bottle or food jar from the chamber and disconnect the
appliance from the electrical outlet.
For bottles: pick up the bottle and shake it. Pour a small quantity of liquid on the back of your hand
to check the temperature
For food jars: mix the contents and check the temperature of the food.
CAR USE
Never use the bottle warmer while the vehicle is in motion.
Leave your engine running when using the bottle warmer to avoid draining your battery.
The car adapter cord is specially designed for this bottle warmer: never use it with other appliances.
Regularly check the cigarette lighter socket in your car. Clean it if necessary.
If you have just used your car's cigarette lighter. Allow it to cool for 5 minutes in the open position
before plugging in with the bottle warmer.
Instructions for use in car:
Stop the car and keep the engine running.
Place the bottle warmer on the flat and stable surface.
Connect the car adaptor cord into the DC socket of the bottle warmer.
Put the car adaptor cup with water, following the instructions shown above, then pour the water into
warming chamber. Repeat above steps from Instruction for use at home section.
Attention: in car use, the AC socket has no use. Once you plugged in the car adapter cord, the bottle
warmer has its power source supplied (DC cord).
CLEANING DIRECTIONS
Before cleaning the appliance, always unplug the power cord from the electrical outlet and make
sure the appliance has cooled down.
Use a damp cloth (or sponge) and water or detergent (non-abrasive) to clean the appliance and/or
its accessories and remove any milk residues. Use water. Never immerse the appliance in water or
any other liquid.
Do not use abrasive, corrosive or solvent detergents to clean the appliance. This could damage the
appliance and its surfaces.
. indicator light will turn on while heating, and automatically
. indicator light will turn on while heating, and automatically
. indicator light will turn on while heating, and automatically while constant
9