In Case Of Problem - Parrot MKi9000 Guía De Instalación Rápida

Music
• Use the iPod, USB or Jack connectors to connect the
Parrot MKi9000 to your iPod / USB stick / audio player.
• You can also use the Parrot MKi9000 to listen to songs
stored on your mobile phone / PDA / smartphone. Your
mobile phone must support the Bluetooth® A2DP profile.
• To change the music source, press the jog wheel to
access the source menu and select it in the following
order :
- iPod (or iPhone) ;
- USB (MP3 player / USB flash drive) ;
- Audio Bluetooth (audio player supporting A2DPprofile
connected via Bluetooth) ;
- Line In (analogue audio player).
While playing a song, press the red button to get to
main menu. While navigating through the menus, press
the Play button to get to the Now Playing screen.
There is no restriction in terms of capacity of USB stick. Only
MP3 (Mpeg 1 Layer3) or WMA formats are
supported.

In case of problem

Before you begin
Make sure you have the latest software update on your
Parrot MKi9000. Compare this number with the one on our
website, Downloads section.
Problems while using the phone function
• Make sure your phone is compatible with the Parrot
MKi9000. To do so, refer to the compatibility list of the
Parrot MKi9000 available on our website www.parrot.com,
in the Support & Downloads section.
• If your phone is compatible with the Parrot MKi9000 and if
you already have the latest software update:
1. Erase the memory of the Parrot MKi9000. To do
so, hold down btoh the red and green buttons for 3
seconds.
2. On your telephone, erase the Parrot system from the
list of Bluetooth peripherals (or reboot your iPhone).
3. Repeat the linking procedure for the 2 devices.
17