SAFETY WARNINGS FOR THE APPLIANCES USING
R290 COOLING FLUID (PROPANE)
Propane is a natural gas that doesn't affect the environment but is inflammable.
It is therefore indispensable to check that the cooling circuit tubing is not damaged before
connecting the equipment to the mains. For every 8gr. of cooling fluid, the installation location must
have a minimum volume of 1 cubic metre. The amount of cooling fluid in the appliance is indicated on
the technical data plate on the back. Leakage of cooling fluid: avoid naked flames or over sources of
ignition at the seat of the leakage. Be careful not to damage the cooling fluid circuit during positioning,
installation or cleaning. Avoid flames or sparks inside the equipment.
Warning! Do not damage the cooling fluid circuit
Warning! Do not damage internal or external walls of the machine: the cooling fluid circuit may
damage. In case of damaged walls do not start the machine and refer to a service centre.
Warning! In case of damaged cooling fluid circuit, do not start the machine and refer to a service centre.
Warning! Keep clear of obstruction all ventilation openings in the appliance enclosure or in the
structure for building-in.
Warning! Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
Warning! Do not store explosive substences such as aerosol cans with flammable propellant in this aplliance.
INSTALLATION
Remove the packaging completely; clean the cabinet using
warm water with a 5% concentration of neutral soap.
Be sure to use a soft cloth for drying.
Note that only specific product can be used for the glass, e.g.
some types may leave behind limestone residues.
Never use electrical equipment in the refrigerated compartment.
Never place containers of liquid on or immediately above the ticket counter; should the content
spill out, it would damage the counter.
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS ENVI-
RONMENT WITH RISK OF FIRE, EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on technical data plate.
INFORMATIONS ABOUT USE
Cabinet must be installed on a perfectly even surface, far away
from any heat source (radiators, stoves, etc) including sun rays.
Good running of the cabinet can be compromised in cases
where the airflow is disturbed (wind, ventilators, air condi-
tioning outlets, etc).
Smooth running of the cabinet is assisted when sufficient
air is permitted to flow through the bottom of the unit; it is
very important that the grills at the base are kept uncovered.
Do not expose the cabinet to rain.
Install and position the unit in such a way so as to allow
easy access to the power socket.
-7-