DeLOCK LED 18 W Manual Del Usuario página 4

switched on.
• Never let children play unattended in the vicinity of the light or other electrical devices.
Installation:
1. Turn off the power or remove the fuse prior to mounting the panel.
2.
If you are planning to mount the panel on the ceiling or a suspended ceiling you have
to saw a hole with a diameter of 230 mm at the desired mounting place. The panel is
suitable for ceilings with a thickness of ca. 5-20 mm.
3. Attach the mounting clamps at the destined holder of the back side of the panel. The
springs have to be applied onto the noses of the holder so that the shorter side of the
clamps rest on the back side of the panel. (see figure)
4.
Now connect the panel to the power supply. Please note that the panel must be used
with the included power supply.
5. Connect the power supply to the mains supply. The brown wire marked as "L" has to
be connected to the brown or black wire of the mains supply (phase conductor), and
the blue wire marked as "N" has to be connected to the blue wire of the mains supply
(zero conductor). Make sure that no tensile or twisting forces affect the cables. The
power cord must not touch the low voltage cable or the lamp.
6.
Insert the lamp into the ceiling. The clamps have to be bent up so that they can hold
the panel on to the ceiling.
7. Turn on the power again or put the fuse back in.
General Information:
Contact
You can find the latest product information on our website www.delock-lighting.de.
You may also send an email to info@delock-lighting.de.
Final clause
Information and data contained in this manual are subject to change without notice in
advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced or transmitted for any purpose, regardless
in which way or by which means, electronically or mechanically, without explicit written
approval of Delock Lighting.
Edition: 09/2012
- -