Safety Regulations; Working In Safety; Operation Safety - WAGNER PlastMix 15 Manual De Instrucciones

GB
1

SAFETY REGULATIONS

1.1

WORKING IN SAFETY

To ensure complete safety, read all the in-
structions in this manual carefully.
This OPERATION AND MAINTENANCE manual must be kept
by the Site Manager and be always available for consultation.
The manual is considered part of the machine and must be
stored for future reference ( EN ISO 12100-2 ) through to scrap-
ping of the machine itself. If the manual is lost or damaged, a
replacement copy can be ordered from the manufacturer.
The manual contains the EC declaration of conformity (2006/42/
EC) important information on construction site procedures, in-
stallation, operation, maintenance and requests for spare parts.
Nevertheless, the user must both have adequate experience
and knowledge of the machine prior to use: the user should
be trained by a person totally familiar with the operation and
use of this machine.
To guarantee complete safety of the operator, safe operation
and long life of equipment, follow the instructions in this ma-
nual carefully, and observe all safety standards currently in force
for the prevention of accidents at work (use of safety footwear
and suitable clothing, helmets, gloves, goggles etc.).
Make sure that all signs are legible.
It is strictly forbidden to carry out any form
of modification to the steel structure or
working parts of the mixer.
Wagner accepts no responsibility in the event of damage or
defects on machinery or equipment not supplied by Wagner
and used in combination with Wagner machinery.
Wagner accepts no responsibility in the event of failure to com-
ply with laws governing the use of this type of equipment, with
particular reference to: improper use, incorrect power supply,
lack of maintenance, unauthorised modifications, failure to
comply, either wholly or partially, with the instructions set out
in this manual.
Wagner reserves the right to modify the characteristics of the
mixer and/or contents of this manual, without the obligation
to update the previous machine and/or manuals.
THE CONTINUOUS HORIZONTAL MIXER is
designed for use in building sites, for mixing
and pumping all mixed mortars declared as
compatible with this type of machine by the
material manufacturers.
16
1.2

OPERATION SAFETY

Before using the mixer, ensure that it is
fitted with all safety devices.
Before using the continuous mixer, always
check it for any signs of damage. Particularly
electric cables, plugs and connections.
Never insert parts of the body and/or tools
in the hopper or discharge outlet during
operation.
Always use the mixer in sufficiently ventila-
ted environments.
The hazardous points on the Wagner mixer are protected by
means of suitable safety devices, which must remain fitted at all
times and kept in perfect condition. For example, this includes
the electric motor cooling fan guard and the hopper grid (fig.
1, ref. 10) to prevent contact with the auger.
Also, release of the mixing chamber, shuts down all rotary parts
of the machine immediately thanks to a specific safety device.
All current standards governing accident prevention and safety
devices must be observed in the workplace.
Take care when handling sacks of material to avoid dispersion
of dust with inhalation of the latter; if this is not possible, masks
must be worn to protect the mouth and nose.
Never use the machine in areas subject to
the risk of explosion/fires or in underground
installations.
The mixer is not equipped with a lighting system and therefore
the workplace must be fitted with adequate lighting.
CAUTION! Keep the hands away from the
outlet.
Before carrying out any cleaning or maintenance work, switch off
the continuous mixer. Unplug the power plug from the outlet.
Never spray off the device with a power spray and especially not
with a high-pressure cleaner or high-pressure steam cleaner. Dan-
ger of short-circuits caused by water ingressing !
PlastMix 15