07.14 Password
Secure the camera with password, to avoid misuse. The password is needed every time the camera is switched on. Default
password is 0000.
With the navigation buttons (11) or select On or Off. Press the OK button (12) to display the default password. The individual
numbers can be changed with the navigation buttons (11) . To save your new password press the OK button (12). The next time the
camera will be switched on, the password will be requested!
Note your password carefully, without the password the camera cannot be operated.
07.15 TV Out
Determine the TV output format. This setting is required if you wish to connect the camera to a USB compatible TV set. In this case,
connect the supplied USB cable (21) with the Mini USB port of the camera (15) and the TV set. Press the navigation buttons (11) or
to select between PAL or NTSC. To save your settings press the OK button (12). To know the signal your TV supports (PAL or NTSC)
please refer to the instruction manual of your TV set.
07.16 Language
Select the menu language.
Press the navigation buttons (11) or to select between English, German, French. To save your settings press the OK button (12).
07.17 Format
This function deletes all files from the SD card and re-formats the memory card.
Make sure that you do not need the files on the SD card anymore, before you start formatting!
Press the navigation button (11) to select Yes. To start formatting press the OK button (12). While formatting LCD display (08) shows
"Please wait".
07.18 Reset
Restoring of Factory Settings. This function restores all settings to initial settings (factory settings, except date and
time). Press the navigation button (11) to select Yes. To confirm press the OK button (12).
07.19 Playback
Opens the photo/video gallery to watch your photos and videos. For videos, the video preview image will be displayed only – the
video cannot be played.
Press the navigation buttons (11) or to browse through your photos and video recordings (
back to start screen.
07.19.1 Delete Photo or Videos:
Press the MENU button (10) while in PLAYBACK mode to delete files.
Press the navigation button (11) to select Delete and confirm with the OK button (12).
If you just want to delete selected file, confirm Single with OK button (12).
If you want to delete all files, confirm All with OK button (12).
Caution - deleted images cannot be restored!
07.19.2 File Numbering
Images and videos are numbered in sequence in a folder on the SD card, starting with IMG0001.jpg or IMAG0001.avi.
The suffix .JPG stands for photos, .AVI stands for videos.
07.20 Beep
Here you select, whether the camera should confirm your key pressings with a beep tone or not.
Press the navigation buttons (11) or to select On or Off. To save your settings press the OK button (12).
21
). Press the OK button (12) to get
doerr-outdoor.de