Safety Instructions - HQ-Power VDPSP2 Manual Del Usuario

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VDPSP2! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• It is essential that the device be earthed. Have a qualified person carry out the electric connection.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not apply power before installation completion.
• Always disconnect from the mains before replacing the fuse.
• Do not expose to rain or moisture.
• Do not try to repair the device but send it back to your dealer.
3. Use
DMX IN: connection from the DMX transmitting device.
DMX OUT: connection to the DMX receiving device.
VDPSP2
VDPSP2 – 2-WAY DMX DISTRIBUTOR
PIN designation
1 = Shield
2 = Data-
3 = Data+
4 = Not used
5 = Not used
3 VELLEMAN