Publicidad
Idiomas disponibles
Idiomas disponibles
• CALL BEFORE YOU DIG... DIAL 811
Before installation of any ground anchor,
determine that the ground anchors to be
installed will not be near any under ground
electrical cables, phone lines, water lines, sewer
pipes, or gas lines. Failure to do so may result in
serious injury or death.
5. Place anchor tip in location where anchor is to be buried.
The Electric Drive Machine (EDM) is designed for
operation by two people. Hold anchor in place at the
desired installation angle.
6. Place anchor head into adapter, line up anchor shaft with
EDM shaft. For easier installation place a 1/2" pull pin or a
slotted bolt thru the adapter head (Safety Pin Hole) and
anchor head. Make sure the pull pin/bolt comes out the
other side. This will prevent the EDM from separating
from the anchor.
7. Flip forward/reverse switch to forward.
8. Hold the power switch on until anchor reaches
proper depth. The power switch is spring loaded.
If you encounter any problems release the switch
and the machine will shut off automatically.
Operation Instructions
Forward
Reverse
404-344-0000 • tiedown.com
605 Stonehill Drive SW, Atlanta, GA 30336
Power Switch
Publicidad
